Tradesman Civil Syllabus 2025 (Cat.No. 276) | Technical Education

Are you aspiring to join the Technical Education department as a Tradesman Civil? Understanding the detailed syllabus is your first crucial step towards successful preparation. This comprehensive guide breaks down the official syllabus for the Tradesman Civil post (Cat.No. 276/2025), providing a clear roadmap of all modules, their respective marks, and key topics. Dive deep into each section, from Basic Engineering Drawing to Public Health and Sanitation, to ensure you cover every essential area for the upcoming examination.

Tradesman Civil Syllabus Overview (Cat.No. 276/2025)

The Tradesman Civil examination for the Technical Education department (Cat.No. 276/2025) is structured across ten distinct modules, each carrying a specific weightage in marks. A thorough understanding of this distribution is vital for strategic study planning. Below is an overview of the modules and their allocated marks:

Detailed Module Breakdown for Tradesman Civil Exam

To excel in the Tradesman Civil examination, candidates must thoroughly prepare each module as per the official syllabus. Here’s a detailed breakdown of the topics covered in each module:

Module 1: Basic Engineering Drawing (8 marks)

• Drawing instruments, Uses
• Layout of drawing sheet, Types of lines, Lettering
• Dimensioning, Types of Scales
• Plane geometrical construction, Conic section, Projection

Module 2: Building Materials and Construction (12 marks)

• Properties of engineering materials
• Building Stones, bricks, lime, timber, tiles, sand, cement mortar and concrete
• Admixtures, Ferrous metals, Non ferrous metals, Glass, Protective materials

Module 3: Building Construction (20 marks)

• Stone masonry, Brick masonry, composite masonry
• Foundation, Bearing capacity of soil
• Scaffolding shoring and underpinning
• Damp proofing water proofing and termite proofing
• Arches, lintels, stairs
• RCC – introduction, uses, materials proportions, Formwork (including bending of bars and construction reference of BIS code)
• RCC lintel, column, slab, beam, footings
• Method of mixing concrete, slump test
• Steel structures – Common forms of steel sections, Tension and compression member, Types of riveted joints, welded joints
• Doors and windows, Roofs, Floors and floorings

Module 4: Building Drawing and Estimating (12 marks)

• Building rules and byelaws, Provision of safety for buildings
• Types of estimate, Sanctions, Rules and methods of measurements of works
• Rate analysis, labour, materials, schedule of rates
• Valuation- terms

Module 5: Irrigation Engineering (6 marks)

• Terms used in irrigation, Water requirements of crops
• Wiers and barrages, storage and diversion headwork
• Reservoir, Dams, Canals, Cross drainage works
• Hydroelectric projects and Turbines

Module 6: Surveying (14 marks)

• Chain surveying- principles-instruments used, Field book plotting
• Compass surveying, Planetable surveying
• Levelling and contouring
• Curves, Theodolite
• Area and volume calculation
• Introduction to total station, Types of total station, Measurement with total station, Characteristic and features of Total station
• Global positioning systems

Module 7: AutoCAD (8 marks)

• Introduction, Basic commands
• Tool bars, Function keys and shortcut keys
• 2D drafting, 3D modelling-shortcut keys
• Knowledge of layout and printing drawing

Module 8: Units of Measurements and Applied Mechanics (6 marks)

• Units of measurements, Simple machines
• Work, power, energy
• Simple stress, strain
• Mensuration, simple trigonometry

Module 9: Transportation Engineering (8 marks)

• Road, Development of road, General principles of alignment
• Classification and construction of different types of roads
• Railway engineering- Type of rail sections, Permanent way, Sleepers Ballast, Fixtures and fastenings
• Creep – Screw spikes – Washers Rail sections
• Signalling Points and crossings
• Bridge engineering- Foundation of bridges, Super structure of bridges and classification of bridges

Module 10: Public Health and Sanitation (6 marks)

• Pipes and pipe joints for underground drainage
• Quality of water, Sources of water, Treatment and conveyance of water, Distribution of water
• Systems of sanitation, house drainage, collection and conveyance of sewage
• Septic tank, water and sewage treatment plant, Sewer appurtenances, waste water disposal

Important Note from the Official Notification

Candidates should be aware of the following disclaimer from the official syllabus document:

NOTE: It may be noted that apart from the topics detailed above, questions from other topics prescribed for the educational qualification of the post may also appear in the question paper. There is no undertaking that all the topics above may be covered in the question paper.

This implies that while the provided syllabus is comprehensive, candidates should also be prepared for questions from broader topics related to their educational qualification for the Tradesman Civil post. It also suggests that not every topic listed might necessarily appear in the final exam.

How to Effectively Prepare for the Tradesman Civil Exam

Preparing for the Tradesman Civil exam requires a strategic approach. Here are some tips to maximize your chances of success:

1. Understand the Weightage: Pay close attention to modules with higher marks, such as Building Construction (20 marks) and Surveying (14 marks), and allocate your study time accordingly.
2. Thorough Concept Clarity: Focus on understanding the fundamental concepts in each topic, as the exam may test conceptual knowledge.
3. Practice Drawing & Design: For modules like Engineering Drawing and AutoCAD, hands-on practice is crucial.
4. Refer Standard Textbooks: Utilize standard civil engineering textbooks and reference materials for in-depth study.
5. Solve Previous Papers: If available, practice with previous year’s question papers to understand the exam pattern and question types.
6. Stay Updated: Keep an eye on any official updates or announcements from the Technical Education department regarding the examination.

By diligently following this syllabus and adopting a structured study plan, you can significantly enhance your preparation for the Tradesman Civil (Cat.No. 276/2025) examination.

FAQs about Tradesman Civil Syllabus 2025

Q1: What is the Tradesman Civil (Cat.No. 276/2025) syllabus about?

The Tradesman Civil (Cat.No. 276/2025) syllabus outlines the detailed topics and modules for the examination for the post of Tradesman Civil in Technical Education. It covers various civil engineering subjects like Building Materials, Construction, Surveying, AutoCAD, and more.

Q2: What does ‘Cat.No. 276/2025’ signify?

‘Cat.No. 276/2025’ is the catalog number or identification code for the specific post of Tradesman Civil for the year 2025, as designated by the Technical Education department or the recruiting authority.

Q3: Is the marks distribution for each module fixed?

Yes, as per the official syllabus, each of the ten modules has a specific mark allocation, totaling 100 marks for the entire examination. Candidates should use this distribution to prioritize their study efforts.

Q4: Are there any topics outside this syllabus that could appear in the exam?

Yes, the official note states that questions from other topics prescribed for the educational qualification of the post may also appear. Candidates are advised to have a broad understanding of relevant civil engineering concepts beyond the listed topics.

Q5: Where can I find study materials for the Tradesman Civil exam?

You can find study materials in standard civil engineering textbooks covering subjects like Building Materials, Construction Technology, Surveying, AutoCAD manuals, and books on Transportation and Irrigation Engineering. Online educational platforms and reference guides can also be helpful.

Q6: How important is AutoCAD in this Tradesman Civil exam?

AutoCAD is a dedicated module carrying 8 marks. Given its specific inclusion and mark allocation, it is an important section. Proficiency in basic commands, 2D drafting, 3D modeling, and layout/printing knowledge is essential.

Q7: Which modules have the highest weightage in the syllabus?

Module 3: Building Construction, with 20 marks, has the highest weightage. Module 6: Surveying (14 marks) and Modules 2 & 4 (12 marks each) also carry significant weightage, making them critical for focused preparation.

Q8: Does this syllabus cover all aspects of the Tradesman Civil recruitment process?

No, this document specifically details the examination syllabus. Information regarding application dates, eligibility criteria, fees, or the selection process is not included here. For such details, candidates must refer to the complete official recruitment notification from the Technical Education department.