SAMEER Recruitment 2026: 29 Project Posts (Walk-in Interview)

The Society for Applied Microwave Electronics Engineering & Research (SAMEER), Centre for Electromagnetics (SAMEER-CEM), Chennai, a premier R&D institution under the Ministry of Electronics & Information Technology, has released an advertisement (No. S-CEM/ESTT/PE-PA-PT/01/2026) for the recruitment of young and dynamic professionals. This walk-in interview drive aims to fill approximately 29 contractual positions including Senior Project Engineer, Project Engineer, Project Scientific Assistant, and Project Technical Assistant across Electronics and Mechanical disciplines. Candidates with B.E./B.Tech, Diploma, or ITI qualifications and relevant experience are encouraged to attend the walk-in interviews scheduled on March 09 & 10, 2026.

Quick Overview

Vacancy Details

SAMEER is recruiting for various project-based contractual positions. The approximate vacancies for each major category are as follows:

Note: Posts with A, B, C suffixes for Project Scientific Assistant and Project Technical Assistant are successive; if a higher level (C) is unfilled, then B will be considered, and if B is unfilled, then A will be considered.

Eligibility Criteria

Educational Qualification & Experience

Candidates must ensure they meet the specific educational qualifications and experience requirements for the post they are applying for:

• Senior Project Engineer (Electronics) (SPE01): B.E./B.Tech in ECE with at least 3 years’ experience OR B.E./B.Tech in ECE with M.E./M.Tech in relevant discipline, with minimum 55% marks. Relevant experience includes Digital Signal Processing, Digital Systems Design (Microcontroller & FPGA), Communication System Design, MATLAB/SIMULINK, FMCW radar, LabVIEW/LabWindows/QT software, Linux OS customization.
• Project Engineer (Electronics) (PE01): B.E./B.Tech in ECE (Freshers or up to 3 years experience) with minimum 55% marks. Desirable experience in areas like Digital Signal Processing, EMI/EMC test & evaluation, RF/microwave instrumentation.
• Project Engineer (Mechanical) (PE02): B.E./B.Tech in Mechanical Engineering with minimum 55% marks. Freshers preferably with knowledge in 3D models and Computational Fluid Dynamics Tool.
• Project Scientific Assistant (Electronics) (PSAA01, PSAB01, PSAC01): Diploma in ECE with minimum 55% marks. PSAA01 is for freshers or less than 3 years experience; PSAB01 requires at least 3 years experience; PSAC01 requires at least 8 years experience. Desirable experience in Digital Signal Processing, EMI/EMC test & evaluation, etc.
• Project Technical Assistant (Electronics) (PTAA01, PTAB01, PTAC01): ITI Trade in Electronics with minimum 55% marks. PTAA01 is for freshers or less than 3 years experience; PTAB01 requires at least 3 years experience; PTAC01 requires at least 8 years experience. Desirable experience in assembling PCBs, soldering, wiring, testing components/circuits, qualification testing.
• Project Technical Assistant (Mechanical) (PTAA02, PTAB02, PTAC02): ITI Trade in Fitter trade with minimum 55% marks. PTAA02 is for freshers or less than 3 years experience; PTAB02 requires at least 3 years experience; PTAC02 requires at least 8 years experience. Desirable experience in mechanical fitting, operation of Lathes, Milling, Drilling, precision measuring instruments, sheet metal fabrication, prototype model fabrication, Tapping, helicoil inserting & removing, stock maintenance.

Age Limit

The age limit for each post is specified in the vacancy table above. Age shall be determined based on the date of advertisement (22-02-2026).

Age Relaxation: Age relaxation for SC/ST/OBC/PwD candidates will be applicable as per Government of India norms.

Application Fee

Application fee details are not specified in the official notification. Candidates are advised to check the official website or the application form for any fee requirements.

Important Dates

Candidates must note the walk-in interview dates and times for their respective posts:

Note: In case of unavoidable circumstances, interviews for shortlisted candidates may continue on the next day.

Selection Process

The selection process for the SAMEER Recruitment 2026 will involve:

1. Screening: Candidates will be screened based on their eligibility criteria and documents submitted.
2. Written Test (for some posts): For posts like Project Engineer (Electronics), Project Engineer (Mechanical), and all Project Scientific Assistant & Project Technical Assistant posts, a written test will be conducted.
3. Interview: All shortlisted candidates (after written test, if applicable) will undergo an interview. For Senior Project Engineer (Electronics), the selection is directly through an interview.

The final selection will be based on the candidate’s performance in the written test (where applicable) and interview.

How to Apply (Walk-in Interview)

Interested and eligible candidates must attend the walk-in interview on the specified dates with all required documents:

1. Download Application Form: Visit the official SAMEER website (sameer.gov.in) to download the prescribed application form. Fill it diligently in BLOCK LETTERS.
2. Pre-registration (Optional but Recommended): To help SAMEER assess the number of candidates likely to attend, you are requested to register at the following link: https://forms.gle/K3e2w6bMf88rUoPs7
3. Prepare Documents: Gather all original certificates and one set of self-attested photocopies as listed in the ‘Documents Required’ section below.
4. Attend Walk-in: Report at the specified venue on the respective date and time for your post.
5. Reporting Time: Ensure you report between 9:00 AM and 9:30 AM.
6. Submission: Submit the duly filled application form along with self-attested photocopies of documents.
7. Verification: Originals will be verified at the time of the interview.
8. Multiple Posts: Candidates desirous of applying for more than one post must apply separately for each post, indicating the post code.

Important Links

Documents Required on Interview Day

Candidates must bring the following documents (one set of self-attested photocopies along with ORIGINALS for verification) to the walk-in interview:

• Duly filled application form (available on SAMEER website)
• Proof of Date of Birth (e.g., SSLC/10th Mark Sheet)
• Passport size photograph (affixed on the application form)
• SSLC Mark Sheet
• HSC Mark Sheet (if applicable)
• ITI Certificate (for Project Technical Assistant Posts)
• NCVT Certificate (for Project Technical Assistant Posts, if applicable)
• Qualifying exam passing certificate (e.g., B.E./B.Tech/Diploma/ITI certificate as per post applied)
• Qualifying exam mark sheets for all years/semesters (as per post applied)
• Experience certificate(s) (duly signed and stamped) as applicable for the post, clearly indicating duration and nature of work.
• Caste Certificate (for SC/ST/OBC-NCL candidates) issued by the competent authority in the prescribed Government of India format. OBC candidates must submit a valid Non-Creamy Layer Certificate.
• Disability Certificate (for PwD candidates) issued by the competent authority, as per Government of India norms.
• Any other relevant certificates or testimonials.
• A valid Photo ID proof (Aadhar Card, PAN Card, Driving License, Passport, etc.) – *Typically required for identification, though not explicitly listed, it is a standard practice for government walk-ins.*

Job Profile & Career Scope

Working at SAMEER offers a unique opportunity to contribute to cutting-edge research and development in Microwave Electronics, Electromagnetics, and allied areas. As a Project Engineer/Scientific Assistant/Technical Assistant, you will be involved in:

• Digital Signal Processing: Designing and developing indigenous technology and systems, implementing DSP algorithms, and working with tools like MATLAB/SIMULINK.
• Electromagnetic Interference and Compatibility (EMI/EMC): Gaining hands-on experience in world-class EMC Laboratories, learning international compliance requirements, evaluation methodologies, and troubleshooting complex EMI issues.
• Mechanical and Thermal Engineering: Focusing on thermal management of electronics systems, working with 3D models, CFD tools, and mechanical fitting for electronic enclosures.
• Electronics Assembly & Testing: Assembling components in PCBs, soldering micro/nano devices, wiring, conformal coating, and qualification testing of sub-systems.

These contractual positions, while not conferring rights for regularization, provide invaluable experience in a government R&D environment. This exposure can significantly boost your professional value, making you industry-ready for specialized domains with high demand in both public and private sectors.

Preparation Tips

For a walk-in interview, preparation is key to making a strong impression:

1. Document Organization

• Checklist: Go through the ‘Documents Required’ list meticulously.
• Originals & Photocopies: Keep all original certificates ready and arrange one set of self-attested photocopies in the correct order.
• Application Form: Fill the application form accurately and neatly. Affix a recent passport-size photograph.

2. Technical Preparation

• Revise Core Concepts: Brush up on the fundamental concepts of your engineering discipline (Electronics/Mechanical). Focus on areas mentioned in the ‘Relevant areas of experience’ for your specific post.
• Project Knowledge: Be prepared to discuss any projects, internships, or previous work experience in detail, especially those aligning with SAMEER’s work areas.
• Software/Tools: If specific software (e.g., MATLAB, LabVIEW, 3D modeling tools) or instruments are mentioned, be ready to demonstrate or discuss your proficiency.

3. Interview Skills

• Research SAMEER: Understand SAMEER’s mission, ongoing projects, and contributions to the field.
• Common Interview Questions: Practice answering questions about your strengths, weaknesses, career goals, and why you want to work at SAMEER.
• Communication: Present yourself confidently and clearly. Be polite and professional.

4. Logistics

• Venue & Time: Plan your commute to reach the venue well before the reporting time (9:00 AM – 9:30 AM).
• Attire: Dress in professional formal wear.

Frequently Asked Questions

Q1: Is this a permanent job?

No, these are purely contractual appointments for a tenure of two years or till the end of the project, whichever is earlier. It does not confer any right for regularization or absorption into SAMEER services.

Q2: Can candidates from other states apply?

Yes, Indian citizens are eligible to apply. However, the walk-in interview is conducted in Chennai, and candidates must make their own arrangements for travel and accommodation.

Q3: Is there any application fee?

The official notification does not mention any application fee. Candidates are advised to confirm this during the walk-in process or by checking the official website.

Q4: What if I have more experience than required for a post?

Experience beyond the years prescribed in the advertisement will not be considered for the grant of additional increments. Ensure your experience aligns with the post’s requirements.

Q5: Can I apply for multiple posts?

Yes, if you meet the eligibility criteria for more than one post, you can apply for each separately by submitting a distinct application form for each post, clearly indicating the respective post code.

Q6: What documents should I bring for the walk-in interview?

You must bring a duly filled application form, original certificates of educational qualification, experience, age proof, caste/disability certificates (if applicable), passport-size photograph, and one set of self-attested photocopies of all these documents. A valid photo ID is also recommended.

Q7: Will TA/DA be provided for attending the interview?

No, TA/DA will not be paid to candidates for appearing for the screening test and/or interview.

Q8: What if I don’t have all original certificates on the interview day?

Candidates must produce all original certificates for verification at the time of the interview. Failure to do so may lead to rejection of candidature. Ensure you have completed your qualifying course as on the date of the walk-in interview.